Facade Systems
Concealed Fastener Rainscreen System
System Depth = 2 3/4”
Joint Width = 3/8”
 
System Components:
1.    Trespa® Meteon® Panel
2.    Universe Aluminum J-Extrusion – Black Color
3.    Universe Aluminum Rail – Black Color
4.    Extrusion Fastener
5.    Fixed Bracket (Shop Attached)
6.    Adjustable Bracket (Shop Attached)
7.    1/2” Aluminum Thermal Isolator
8.    Mineral Wool Insulation
9.    Air & Moisture Barrier
10.    CMU
 
Notes:
•    J-Extrusions (2) are included at 32” on center for bidding purposes – if structural calculations are required, additional J-extrusions may be required.
•    1/2” Aluminum Thermal Isolators (7) are required where the Rails (3) meet each J-Extrusion (2).
•    Mineral wool insulation (8) is required and must be the same depth as the J-Extrusion (2).
•    Air & Moisture barrier (9) must be VaproShield® WallShield®, WrapShield®, RevealShield™, Cosella-Dorken Delta® Fassade-S, Delta® Foxx, Delta® Foxx-S, Tyvek® CommercialWrap®, Dow Corning DefendAir 200 or Momentive™ SEC2500-SilShield AWB.
•    Available with 10mm and 13mm Trespa Meteon (1) panel thickness only.
 
Online Shop